High-performance automatic charging-discharging station with battery management for 1 ... 30 NC / NiMH cells, 1
... 21 lead-acid cells, and 1 ... 12 Lithium cells.
Charge current from 0.1 ... 12 Amps

Discharge current from 0.1 ... 22 Amps

Functions:
Charge

Discharge
Discharge -> charge 1 ... 99 cycles
Charge -> discharge 1 ... 99 cycles
The menu system is displayed on the integral 1 x 16 character dot matrix LCD screen. The following parameters
can be varied and read off using the buttons with their well-defined trigger points:

Display of:
Charge voltage and charge current
Discharge voltage and discharge current
Charged-in and discharged capacity
Average voltage, cut-off voltage
Charge time and discharge time
Input voltage (car battery)
Voltage at Tx / Rx output
Last five stored values for "discharged capacity"
Last five stored values for "charged-in capacity"

Adjustment of:
Charge current 0.1 ... 12 A
Discharge current 0.1 ... 22 A
Final discharge voltage 0.1 ... 50 V
Choice between digital Delta Peak charge termination (NC / NiMH) and final charge voltage termination (Lithium
and Lead-acid), or temperature cut-off.
Charge termination temperature
Screen can be set to individual display or summary display.

An update of older Maxamp chargers to the Li/Pb version is possible through the robbe Service Department.

Specification:
Input voltage: 11 - 15
Dimensions: 170 x 180 x 70 mm
Charge current: 0.1 - 12 A
No. of NC cells: 1 - 30